Digital Battery Charger Amio Am-02088 6/12V 2A/4A 60W Ip65

"The DBC-4A charger can charge lead-acid batteries (regular and MF), Ca/Ca, AGM and gel batteries. It is a microprocessor rectifier, manufactured in accordance with the IP65 standard, which means resistance to dust and splashes, such as and low pressure water jets.It has protection against: short circuit Reverse battery connection (reverse polarity) open circuit spark protection overcharging the battery rectifier overload rectifier overheating there are 6 charging modes: Batteries 6V to 14Ah 7.2V to 2A 7.4V to 2A (cold charging) 12V to 14Ah and deep discharged batteries 14.3V to 2A 14.7V to 2A (cold charging) Batteries 12V over 14Ah 14.3V to 4A 14.7V to 4A (cold charging) It shows the battery voltage and charge level continuously and adjusts the charging current depending on its needs. After charging, it displays FULL message and maintains battery voltage. Specification: Supply voltage 230V 50Hz Output voltage: 6/12V Power consumption: about 60 W (1 W standby) Maximum charging voltage: 7.4V (for 6V batteries) 14.7 V (for 12 V batteries) Maximum charging current: 2A +/- 10%, 4A +/- 10% Supported battery capacities: 6V - 1.2Ah to 14Ah 12V - 1.2Ah to 14Ah and 14Ah to 120Ah Degree of protection: IP65 6 charging programs switched with the ""OPERATION MODE"" button. backlight display Gel batteries with a capacity of up to 14Ah used in motorcycles and scooters must be charged by selecting the program with the motorcycle icon on the screen. Charging at a higher current may damage the battery."