Acrylic primer X 5L, digested with 25% terpentin, covers 8m2

Acrylic primer X 5L white. Primer X is a special primer with incredible penetrability into absorbent infrastructures such as spackle, for use on exterior and interior walls. Serves as a primer on new walls before application of Super Flexible or Tulip Decorative Plaster. The material penetrates the plaster very well, strengthens it and guarantees perfect adhesion of Super Flexible and other acrylic paints (Primer X is not recommended for use on existing acrylic paint). Surface Preparation: Clean the infrastructure well to remove any foreign material, such as: dust, dirt etc. Defects in spackle can be repaired with the aid of Altech Violet with the addition of 25% cement or with Rigid Wall Putty. Repairs can be made before or after application of Primer X, and then a second coat of Primer X is to be applied to the repairs. Old walls should be rinsed with a high water pressure machine to remove soot, salts, dust etc. Dry well before applying white Primer X (we recommend at least 24 hours). Application with a roller, airless spraying or brush. White Primer X is to be diluted with 25% mineral turpentine only. Mix well before application. Wait at least six hours for drying in summertime and 24 hours under other conditions. Clean Up: Tools can be cleaned with turpentine immediately after use. Finish Shade: White. Gloss level: Matt. Physical Properties: Contains: Solvent-based polymeric compound. Dilution: mineral turpentine. Coverage: 8 m2/L. The coverage capability is calculated according to the work of a skilled laborer on an infrastructure with an ordinary degree of absorption and may vary according to the working method, surface and weather conditions. Limitations: Do not apply the material when the temperature is below 7⁰C or when rain is predicted. Dry Time: To recoat: 6 hours (under ordinary weather conditions), To touch: 2 hours, Full cure: 12 hours.